Reasoning
Place Value Task
Also called: place value understanding task, multi-digit number task, base-ten blocks task, unit-decade compatibility task, digit value task
Measure place value understanding: participants type the number that base-ten blocks show, choose blocks for a number, pick the greater of two numbers and say what a digit is worth, scored as accuracy by question type with wrong answers sorted by how they were reached.
5-8 minUntimed
Free to start: 10 free participants per account, then $0.99 per participant for academic research, or any yearly plan. Try it here first, with no account.
- Papers, 2021 to 2025
- 50
- Evidence grade
- D
- Registered clinical studies
- 0
What it measures
Measures place value understanding. Participants type the number that base-ten blocks show, choose the blocks that show a number, pick the greater of two numbers (two-digit pairs whose tens and units agree or disagree, and three-digit pairs) and pick what a digit is worth, such as the 4 in 47. In the last two parts half the items have blocks beside them. The main score is accuracy; wrong answers are sorted into digits in the wrong order, a zero left out, counting the pieces, following the units and giving a digit its face value.
Constructs
- Place value understanding
- Reading multi-digit numbers from blocks
- Comparing tens and units
- Digit value
Research uses
- Mathematics education research
- Numerical cognition research
- Research on multi-digit number understanding
- Comparing questions with and without blocks within a study
How the paradigm works
Place value is the idea that a digit is worth what its place makes it worth: the 4 in 47 means forty and the 4 in 407 means four hundred. Ross (1989) describes place value and part-whole relations as concepts students find difficult and understand slowly over several years, and Fuson and Briars (1990) taught it with base-ten blocks, where a big square is worth 100, a long bar 10 and a small square 1. Two-digit numbers are compared by their tens and their units separately: in German participants a pair whose tens and units point the same way (52 and 67) is easier than a pair where they disagree (47 and 62), with the numerical distance controlled (Nuerk, Weger and Willmes, 2001), and children from Grade 2 on process the decades and the units separately (Nuerk, Kaufmann, Zoppoth and Willmes, 2004). First graders' place-value understanding predicted specific aspects of their addition in third grade (Moeller et al., 2011). In this task people answer 34 questions in four parts: they type the number that blocks show, choose the blocks that show a number, choose the greater of two numbers and choose what a digit is worth. The pairs where the tens and the units agree or disagree are 15 apart on average in both kinds, and in the last two parts half the questions have blocks drawn beside the numbers.
Scores
- Accuracy%
- Right answers over the questions shown, 34 in a complete run.
- Higher is better
- Blocks to Number Accuracy%
- Accuracy on the 8 sets of blocks whose number is typed.
- Higher is better
- Number to Blocks Accuracy%
- Accuracy on the 6 numbers matched with one of four drawings of blocks.
- Higher is better
- Comparison Accuracy%
- Accuracy on the 12 pairs of numbers, of which the greater is chosen.
- Higher is better
- Digit Worth Accuracy%
- Accuracy on the 8 questions that ask what a digit is worth.
- Higher is better
- Accuracy, Tens and Units Agree%
- Accuracy on the 4 two-digit pairs whose greater number has more tens and more units.
- Higher is better
- Accuracy, Tens and Units Disagree%
- Accuracy on the 4 two-digit pairs whose greater number has more tens and fewer units, such as 47 and 62.
- Lower than for pairs that agree means the units led
- Accuracy, Three-Digit Pairs%
- Accuracy on the 4 three-digit pairs, two of them with a zero.
- Higher is better
- Conflict Cost%
- Accuracy on the pairs whose tens and units agree minus accuracy on those where they disagree.
- Higher means disagreeing tens and units cost more
- Two-Digit Accuracy%
- Accuracy on the questions whose numbers have two digits.
- Higher is better
- Three-Digit Accuracy%
- Accuracy on the questions whose numbers have three digits.
- Higher is better
- Accuracy With Blocks%
- Accuracy on the pair and digit questions that have blocks drawn beside the numbers.
- Compare with accuracy without blocks
- Accuracy Without Blocks%
- Accuracy on the pair and digit questions that have numbers only.
- Compare with accuracy with blocks
- Blocks Benefit%
- Accuracy with blocks minus accuracy without blocks, over the pair and digit questions.
- Positive means the blocks helped
- Digits in the Wrong Ordercount
- Typed numbers whose digits are another order of the blocks' digits, and drawings chosen with the tens and units swapped.
- Informational
- Zero Left Outcount
- Typed numbers with the zero of the blocks left out (25 for 205), and drawings chosen with the zero left out.
- Informational
- Counting the Piecescount
- Typed numbers that are the blocks' digits added up, and the pile of small squares chosen for a number.
- Informational
- Units Ledcount
- Pairs whose tens and units disagree where the number with more units, and fewer tens, was chosen.
- Informational
- Digit at Face Valuecount
- Digit questions answered with the digit itself where it is worth more, such as 4 for the 4 in 47.
- Informational
- Whole Number Chosencount
- Digit questions answered with the whole number, such as 47 for the 4 in 47.
- Informational
- Value at Another Placecount
- Digit questions answered with the digit's value at another place, such as 50 for the 5 in 529.
- Informational
- Other Errorscount
- Wrong answers that match no named error, such as one rod too many or another digit of the number.
- Informational
- Unanswered Questionscount
- Typed answers left blank or without a number that can be read.
- Quality check
- Median Answer Timems
- Median time from a question appearing to its answer, for answers of at least 100 ms.
- Informational; the task has no time limit
- Median Time, Tens and Units Agreems
- Median time to a right answer on the pairs whose tens and units agree, for answers of at least 100 ms.
- Informational
- Median Time, Tens and Units Disagreems
- Median time to a right answer on the pairs whose tens and units disagree, for answers of at least 100 ms.
- Longer than for pairs that agree means the disagreement took extra work
- Conflict Timems
- Median time on pairs that disagree minus median time on pairs that agree, over right answers.
- Higher means disagreeing tens and units slowed the answer
- Answers Under 100 mscount
- Answers submitted less than 100 ms after their question appeared.
- 0 expected
- Questions Answeredcount
- Questions with an answer that can be read.
- Fewer than half the planned questions invalidates
- Questionscount
- Questions shown in the scored run.
- Compare with planned questions
- Planned Questionscount
- 34: 8 sets of blocks to type, 6 numbers to match with blocks, 12 pairs to compare and 8 digits to value.
- Informational
- Most Repeated Typed Answercount
- The largest number of sets of blocks given one identical typed number.
- 4 or more is flagged
- Most Used Button Position%
- The share of the choices made with the button in the most used place on screen.
- 90% or more is flagged
Use and evidence
50 papers from 2021 to 2025 name this task in their title or abstract, up 43% compared with 2016 to 2020. That ranks it 462 of 711 test families in our census. See the counts for every test.
Show the numbers
| Year | Papers |
|---|---|
| 2025 | 20 |
| 2024 | 3 |
| 2023 | 9 |
| 2022 | 12 |
| 2021 | 6 |
| 2020 | 3 |
| 2019 | 6 |
| 2018 | 9 |
| 2017 | 11 |
| 2016 | 6 |
| 2015 | 12 |
| 2014 | 6 |
| 2013 | 6 |
| 2012 | 6 |
| 2011 | 10 |
| 2010 | 3 |
| 2009 | 2 |
| 2008 | 5 |
| 2007 | 1 |
| 2006 | 2 |
| 2005 | 0 |
| 2004 | 2 |
| 2003 | 0 |
| 2002 | 2 |
| 2001 | 2 |
| 2000 | 1 |
Use grade D
30 to 99 papers from 2021 to 2025.
Evidence grade D
Little published measurement evidence found.
- Papers on test-retest reliability
- 0
- Papers on reliability or validity
- 9
- Registered clinical studies using it as an outcome
- 0
Measured on ConductCognition
Pooled across the studies that feed our platform norms, by device group. A figure needs 50 or more people.
No pooled figure yet.
Note on the counts: mostly classroom studies.
How the grades work
Use: A is 1,000 or more papers from 2021 to 2025, B 300 to 999, C 100 to 299, D 30 to 99 and E fewer than 30. Evidence: A means at least 25 papers report its test-retest reliability and at least 25 registered clinical studies use it as an outcome; B, at least 8 test-retest papers, and either 5 registered clinical studies or 150 reliability or validity papers; C, at least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies; D, little published measurement evidence found. The counts measure use. They include every paper that names the task in its title or abstract. Grades describe the published research on this task, not ConductCognition's version of it.
Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
Task design
The trial sequence as the test runs in ConductCognition.
- Parts
- Four parts in a fixed order, 34 questions in all after one practice question with feedback: 8 sets of blocks whose number is typed, 6 numbers matched with one of four drawings of blocks, 12 pairs of numbers of which the greater is chosen and 8 digits whose worth is chosen.
- Blocks
- Base-ten blocks drawn by code: a big square is worth 100, a long bar 10 and a small square 1. Three of the four three-digit numbers have a zero, shown as a place with no blocks, and the instructions show the three values.
- Pairs
- Four two-digit pairs whose tens and units agree (34 and 49), four whose tens and units disagree (47 and 62) and four three-digit pairs, two of them with a zero. The two-digit pairs are 15 apart on average in both kinds, so distance does not differ between them.
- Digit worth
- What the 4 in 47 is worth, with the digit itself, the whole number and the digit's value at another place among the four choices. Two of the 8 questions ask for a units digit, whose worth is its face value.
- Blocks beside the numbers
- In the pair and digit parts half the questions have blocks drawn beside the numbers, chosen from the session's seed, so every question appears with and without blocks across sessions.
- Order
- The questions of each part in an order drawn from the session's seed, with the greater number of each pair on the left in half the pairs. No time limit, and no feedback after the practice question.
- Scores
- Accuracy (the main score), by part, by kind of pair, and with and without blocks. Wrong answers are sorted into digits in the wrong order, a zero left out, counting the pieces, following the units and giving a digit its face value.
The questions are this library's own. The scores describe answers to these questions, support research and make no grade-level, school-readiness or diagnostic claim.
Quality checks
Each session is marked valid, needs review or invalid, with the reason, before you see its scores.
Scored rows: place_value_item from the run with the most of them, latest on ties: typed numbers for blocks (no chance level) and choices among 4 drawings, 2 numbers or 4 numbers. Accuracy is flagged, never invalidating, when it is not above chance or is below it, because a wrong way of reading blocks and digits is what the test measures. There is no time limit, so no question can be missed. Fewer than half the planned questions answered invalidates. An incomplete run is flagged, and so is one number typed for 4 sets of blocks or more and one button position on 90% of the choices. Answers under 200 ms on at least half of the answered questions invalidate. A hidden tab is flagged.
Why these rules
An answer under 200 ms is faster than a simple visual reaction, so it cannot reflect the item. Following response-time effort screening for untimed tests (Wise and Kong 2005), the session is invalid only when at least half the answers are that fast. A score over fewer than half the questions cannot be compared with a score over all of them, so it invalidates. Pairs where the tens and the units disagree, digits read at their face value and zeros left out are wrong answers that the test measures, so accuracy below or at chance is reviewed and never invalidates. A typed number repeated for half the blocks cannot follow blocks that differ, and one button position on nearly every choice cannot follow options whose order is drawn at random; both are flagged. Questions stay on screen until they are answered, so a hidden tab does not change what was shown, but it can mean a calculator or help was used; it is flagged.
Running this test
Settings you can change
This test runs with fixed settings.
Need a different version of this test?
Devices and languages
- Untimed test: runs on desktops, laptops, tablets and phones. Participant devices
- Languages: English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese.
- Available on: Every plan, including the free plan.
- Recruiting online? See the setup guides for Prolific, Sona Systems, CloudResearch Connect and Qualtrics.
Cite and describe
Participants completed the Place Value Task in a web browser (ConductCognition task version 1.0.0, scoring version 1.0.0; Ross, 1989; Fuson & Briars, 1990; Nuerk, Weger & Willmes, 2001). The main score was accuracy (right answers over the questions shown, 34 in a complete run).
ConductCognition versions: task version 1.0.0, scoring version 1.0.0. Every export records the versions each session used, for a methods section.
- Ross, S. H. (1989). Parts, wholes, and place value: A developmental view. The Arithmetic Teacher, 36(6), 47-51. https://doi.org/10.5951/at.36.6.0047Place value and part-whole relations as concepts that students understand slowly, over several years.
- Fuson, K. C., & Briars, D. J. (1990). Using a base-ten blocks learning/teaching approach for first- and second-grade place-value and multidigit addition and subtraction. Journal for Research in Mathematics Education, 21(3), 180-206. https://doi.org/10.2307/749373Base-ten blocks, in three sizes, to show place value.
- Nuerk, H.-C., Weger, U., & Willmes, K. (2001). Decade breaks in the mental number line? Putting the tens and units back in different bins. Cognition, 82(1), B25-B33. https://doi.org/10.1016/S0010-0277(01)00142-1Pairs of two-digit numbers whose tens and units agree or disagree, such as 52 and 67 against 47 and 62, with the numerical distance controlled.
- Nuerk, H.-C., Kaufmann, L., Zoppoth, S., & Willmes, K. (2004). On the development of the mental number line: More, less, or never holistic with increasing age? Developmental Psychology, 40(6), 1199-1211. https://doi.org/10.1037/0012-1649.40.6.1199The same pairs in children from Grade 2 to Grade 5, whose tens and units were processed separately from Grade 2 on.
- Moeller, K., Pixner, S., Zuber, J., Kaufmann, L., & Nuerk, H.-C. (2011). Early place-value understanding as a precursor for later arithmetic performance: A longitudinal study on numerical development. Research in Developmental Disabilities, 32(5), 1837-1851. https://doi.org/10.1016/j.ridd.2011.03.012First graders' place-value understanding as a predictor of aspects of their addition in third grade.
Source papers
Questions
How long does the Place Value Task take?
About 5 to 8 minutes, as listed in the test library.
What device does a participant need?
Untimed test: runs on desktops, laptops, tablets and phones. The browser must be Chrome, Edge, Firefox or Safari.
What scores does it produce?
Accuracy, Blocks to Number Accuracy, Number to Blocks Accuracy, Comparison Accuracy, Digit Worth Accuracy, Accuracy, Tens and Units Agree, Accuracy, Tens and Units Disagree, Accuracy, Three-Digit Pairs, Conflict Cost, Two-Digit Accuracy, Three-Digit Accuracy, Accuracy With Blocks, Accuracy Without Blocks, Blocks Benefit, Digits in the Wrong Order, Zero Left Out, Counting the Pieces, Units Led, Digit at Face Value, Whole Number Chosen, Value at Another Place, Other Errors, Unanswered Questions, Median Answer Time, Median Time, Tens and Units Agree, Median Time, Tens and Units Disagree, Conflict Time, Answers Under 100 ms, Questions Answered, Questions, Planned Questions, Most Repeated Typed Answer and Most Used Button Position. Each session is also marked valid, needs review or invalid, with the reason.
How widely is the Place Value Task used in research?
50 papers from 2021 to 2025 name it in their title or abstract, up 43% compared with 2016 to 2020. That ranks it 462 of 711 test families in the ConductCognition test census (use grade D). Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
How much reliability evidence does the Place Value Task have?
In the published research, 0 papers report its test-retest reliability and 0 registered clinical studies use it as an outcome (evidence grade D in the ConductCognition test census).
Which languages can participants use?
Participants can take this test in English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese. English is on every plan, and the other languages come with yearly plans. Have a native speaker read the machine-translated text before launch.
Is this a clinical test?
No. ConductCognition is for research use only. It runs, scores and exports the test; clinical interpretation is outside the platform.
Every test: the full test list.
Run this test in your next study
Start free with 10 free participants on any test, then use participant credits or a yearly plan.