Attention
Noise Acceptance Task
Also called: acceptable noise level, ANL test, background noise acceptance, noise tolerance task, most comfortable level and background noise level
Measure how much background talk people will put up with while following a story: a story through headphones set to a comfortable level on a slider, then babble set to the most the listener accepts, in two rounds.
6-8 minUntimed
Free to start: 10 free participants per account, then $0.99 per participant for academic research, or any yearly plan. Try it here first, with no account.
- Papers, 2021 to 2025
- 51
- Evidence grade
- C
- Registered clinical studies
- 2
What it measures
Measures how much background talk people accept while following a story. Through headphones, a synthetic voice reads a story. The participant sets the story to a level they find comfortable on a slider, then has background babble added and sets it to the most they would put up with while still following the story, in two rounds, one with the sliders starting quiet and one starting loud. The main score is the difference of the two levels in dB, the story less the babble, and needs no calibration. A research measure of what a listener will put up with, not a hearing test.
Constructs
- Noise acceptance
- Tolerance of background noise
- Speech listening preference
- Self-set listening levels
Research uses
- Hearing and speech perception research
- Listening comfort research
- Within-study group comparison
How the paradigm works
Acceptance of background noise: how much noise a listener will put up with while following speech. In the acceptable noise level test (Nabelek, Tucker and Letowski, 1991) a listener sets running speech to the level they find most comfortable, then has background talk added and sets it to the most they would put up with for a long time while following the speech; the speech level less the babble level is the acceptable noise level, in dB. Nabelek and colleagues (2006) studied 191 listeners with hearing impairment and found full-time hearing aid users accepted more background noise than part-time users and non-users. Freyaldenhoven and colleagues (2006) found the level highly reliable over three sessions a week apart in 30 young adults with normal hearing, with a mean that depends on the type of noise. Brännström and colleagues (2012) found that extrinsic factors such as the instructions affect the level, and Olsen and Brännström (2014), reviewing 45 papers, concluded that an inherent acceptance of noise may exist but no method measures it precisely and that the prediction of hearing aid use has yet to be proven valid. This task makes no claim about hearing aids. It lets the listener set both levels on the app's own slider, with the device volume fixed by the sound kit's loudness step, where the published test has a tester move the level, so its scores are not those of the published test.
More about the paradigm
Set a comfortable volume and complete the 6-trial headphone check. A failed check stops the task by default; researchers can choose to continue with a quality flag.
Two rounds, each with two settings. The story is 19 sentences of our own about a walk to a lighthouse, 71 to 85 s, said by the speech kit's synthetic voice in the session's language; it plays again from its start if it ends. First the participant sets the story: a slider, dragged, tapped or moved with the arrow keys, runs from soft to loud, and the participant moves it until the story is at a level they could listen to comfortably for a long time, like the volume of a television watched all evening, and confirms it, which the button allows after 6 s. Then babble, the kit's own eight streams of its sentences summed, fades in at the level of a second slider, and the participant sets it to the most background talk they would put up with for a long time while still following the story, and confirms it after at least 8 s. The story stays where it was set. In one round the sliders start at the quiet end and the participant raises them, in the other they start at the loud end and the participant lowers them, in an order drawn from the session's seed.
Levels are dB re the volume-setting tone, in steps of 1 dB, and the participant sees no number. The story slider runs from -50 dB to a ceiling of -10 to -19 dB, and the babble slider from -70 dB to a ceiling of -11 to -17 dB, each depending on the language's clips, so that the sounds together never pass 0.9 of full scale.
The acceptable noise level of a round is the story level less the babble level. The main score is the mean of the two rounds, which keeps either start from deciding it; each start's level, their difference, the mean levels, the slider moves, the median time to set a level and the rounds completed come with it. A slider never moved, a level at the end of its slider, and rounds more than 10 dB apart are flagged.
Scores
- Acceptable Noise LeveldB
- The story's level less the babble's, as the participant set them on the sliders, averaged over the two rounds.
- Lower means the babble was set closer to the story, so the listener put up with more of it; a level the person set, not a hearing level and not a prediction of hearing aid use
- Acceptable Noise Level, Started QuietdB
- The same difference in the round whose sliders started at the quiet end.
- Lower means more babble was put up with
- Acceptable Noise Level, Started LouddB
- The same difference in the round whose sliders started at the loud end.
- Lower means more babble was put up with
- Start DifferencedB
- The level from the loud start less the level from the quiet start.
- Near 0 when the starting place did not matter; a large value means the start pulled the levels
- Story LeveldB
- The mean level the story was set to, re the volume-setting tone.
- Informational; it depends on the device's volume and is not a sound pressure level
- Babble LeveldB
- The mean level the babble was set to, re the volume-setting tone.
- Informational; it depends on the device's volume and is not a sound pressure level
- Story Slider Movescount
- Times the story slider was moved to a new level, over the rounds.
- Informational; none in every round invalidates
- Babble Slider Movescount
- Times the babble slider was moved to a new level, over the rounds.
- Informational; none in every round invalidates
- Median Setting Timems
- Median time from the start of a setting to confirming its level.
- Informational; a level can be confirmed only after a few seconds
- Completed Roundscount
- Rounds whose two levels were set and are in range.
- Fewer than planned is flagged for review
- Planned Roundscount
- Rounds the run set out to play.
- Informational
- Headphone Check Passed0/1
- 1 when the headphone check passed (at least 5 of 6 right), 0 when it did not.
- 0 stops the test unless the study set it to continue
- Headphone Check Correctcount
- Headphone check trials answered right, of 6.
- 5 or 6 passes
- Reported Output Delayms
- Output delay the device reported to the browser; empty when the browser does not report it.
- Informational
Use and evidence
51 papers from 2021 to 2025 name this task in their title or abstract, down 20% compared with 2016 to 2020. That ranks it 453 of 711 test families in our census. See the counts for every test.
Show the numbers
| Year | Papers |
|---|---|
| 2025 | 12 |
| 2024 | 6 |
| 2023 | 9 |
| 2022 | 11 |
| 2021 | 13 |
| 2020 | 6 |
| 2019 | 17 |
| 2018 | 13 |
| 2017 | 13 |
| 2016 | 15 |
| 2015 | 10 |
| 2014 | 12 |
| 2013 | 17 |
| 2012 | 12 |
| 2011 | 11 |
| 2010 | 6 |
| 2009 | 7 |
| 2008 | 7 |
| 2007 | 6 |
| 2006 | 8 |
| 2005 | 4 |
| 2004 | 2 |
| 2003 | 4 |
| 2002 | 1 |
| 2001 | 2 |
| 2000 | 0 |
Use grade D
30 to 99 papers from 2021 to 2025.
Evidence grade C
At least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies.
- Papers on test-retest reliability
- 7
- Papers on reliability or validity
- 30
- Registered clinical studies using it as an outcome
- 2
Measured on ConductCognition
Pooled across the studies that feed our platform norms, by device group. A figure needs 50 or more people.
No pooled figure yet.
Note on the counts: includes a few studies of noise in human judgments.
How the grades work
Use: A is 1,000 or more papers from 2021 to 2025, B 300 to 999, C 100 to 299, D 30 to 99 and E fewer than 30. Evidence: A means at least 25 papers report its test-retest reliability and at least 25 registered clinical studies use it as an outcome; B, at least 8 test-retest papers, and either 5 registered clinical studies or 150 reliability or validity papers; C, at least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies; D, little published measurement evidence found. The counts measure use. They include every paper that names the task in its title or abstract. Grades describe the published research on this task, not ConductCognition's version of it.
Source: ConductCognition test census 0.58.0, counted 16 November 2026 from OpenAlex and ClinicalTrials.gov.
Task design
The trial sequence as the test runs in ConductCognition.
- Sound setup
- The participant turns the device's volume until a steady 1 kHz tone is comfortable, then takes a 6-trial headphone check (Woods and colleagues, 2017). By default a failed check ends the test; its result is saved either way. The device's volume stays as it was set.
- Story
- 19 sentences of our own about a walk to a lighthouse, 71 to 85 s depending on the language, said by the speech kit's synthetic voice. It plays at the level of a slider and starts again from its beginning if it ends.
- Babble
- The kit's own babble, eight streams of its sentences each played at its own rate and summed, 12 s that loop without a seam. It starts when the second setting starts, at a point in its file drawn from the seed, fading in over half a second.
- Settings
- In each round the participant first moves the story slider to a level they could listen to comfortably for a long time, like the volume of a television watched all evening, and confirms it, which the button allows after 6 s. Then the babble slider is set to the most background talk they would put up with for a long time while still following the story, which the button allows after 8 s. The story stays where it was set.
- Rounds
- 2, in an order drawn from the session's seed. In one the sliders start at the quiet end (the story at -44 dB, the babble at -70 dB, silent) and are raised; in the other they start at the loud end (the story 3 dB under its ceiling, the babble at its ceiling) and are lowered.
- Sliders
- Dragged, tapped or moved with the arrow keys, in steps of 1 dB. The story slider runs from -50 dB and the babble slider from -70 dB, to ceilings of -10 to -19 dB and -11 to -17 dB that depend on the language's clips, so that the sounds together never pass 0.9 of full scale. Levels are re the volume-setting tone, and the participant sees no number.
- Score
- The acceptable noise level of a round is the story level less the babble level, in dB. The main score is the mean of the two rounds, so neither start decides it. Also reported: each start's level, the difference between them, the mean levels, the slider moves, the median time to set a level and the rounds completed.
The published acceptable noise level test has a tester move the level and ask; here the participant moves it on a slider, with the device's volume fixed, so a score here is not a score of the published test. The instructions follow the wording Laureyns and colleagues (2024) quote, and the speech and the babble are synthetic. The babble is eight streams of one synthetic voice, a stand-in for several talkers, not recorded talkers. Levels are relative to the volume-setting tone, not sound pressure, and the score is a difference of two levels from one slider. Whether the level predicts hearing aid use is not settled (Olsen and Brännström, 2014), and this task makes no claim about it. It is a research measure, not a hearing test: it gives no hearing level and no pass or fail, says nothing about any person's hearing, and no percentile is given.
Quality checks
Each session is marked valid, needs review or invalid, with the reason, before you see its scores.
Scored rows: noise_acceptance_round from the selected run, each a story level and a babble level the participant set on two sliders, checked to be whole dB inside the sliders' ranges. A level has no right answer, so accuracy is not judged. Moving no slider in any round invalidates, and moving some settings' sliders not at all is flagged; a story or babble at an end of its slider, rounds more than 10 dB apart and a run short of its planned rounds are flagged for review. A headphone check that stopped the test invalidates, and a failed check with the test run anyway is flagged.
Why these rules
The acceptable noise level is a preference the listener sets, so it has no correct answer and no chance level (Nabelek, Tucker and Letowski 1991; Nabelek and colleagues 2006). Its score is a difference of two levels from one slider, which holds with the device volume fixed: a person who never touches the sliders gives the places they started, and a level at an end of its slider may be where the slider stopped them, not where they would have put it. The two rounds start at opposite ends because the starting place pulls the level toward it, so rounds far apart are flagged. Woods, Siegel, Traer and McDermott (2017) let only listeners who passed the headphone check go on, because a listener on loudspeakers hears the sounds differently; a session that ran after a failed check keeps its scores but not its percentile.
No percentile. Scores and quality flags only.
Running this test
Settings you can change
| Setting | Standard | Allowed |
|---|---|---|
| When the headphone check fails | Stop the test | Stop the test, Continue the test |
Yearly plans can change settings within these limits. Free and pay-as-you-go studies use the standard settings.
Need a setting this test does not have?
Devices and languages
- Untimed test: runs on desktops, laptops, tablets and phones. Needs headphones. Participant devices
- Languages: English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese.
- Available on: Every plan, including the free plan.
- No percentile. Scores and quality flags only. How norms work
- Recruiting online? See the setup guides for Prolific, Sona Systems, CloudResearch Connect and Qualtrics.
Cite and describe
Participants completed the Noise Acceptance Task in a web browser (ConductCognition task version 1.0.0, scoring version 1.0.0; Nabelek, Tucker and Letowski, 1991; Nabelek, Freyaldenhoven, Tampas, Burchfield and Muenchen, 2006), with the standard settings (when the headphone check fails: Stop the test). The main score was acceptable noise level (the story's level less the babble's, as the participant set them on the sliders, averaged over the two rounds).
ConductCognition versions: task version 1.0.0, scoring version 1.0.0. Every export records the versions each session used, for a methods section.
- Nabelek, A. K., Tucker, F. M., & Letowski, T. R. (1991). Toleration of background noises. Journal of Speech, Language, and Hearing Research, 34(3), 679-685. https://doi.org/10.1044/jshr.3403.679The method: running speech set to the most comfortable level, then background talk set to the most the listener puts up with.
- Nabelek, A. K., Freyaldenhoven, M. C., Tampas, J. W., Burchfield, S. B., & Muenchen, R. A. (2006). Acceptable noise level as a predictor of hearing aid use. Journal of the American Academy of Audiology, 17(9), 626-639. https://doi.org/10.3766/jaaa.17.9.2The level in listeners with hearing impairment and its relation to hearing aid use, which this task does not claim.
- Freyaldenhoven, M. C., Fisher Smiley, D., Muenchen, R. A., & Konrad, T. N. (2006). Acceptable noise level: Reliability measures and comparison to preference for background sounds. Journal of the American Academy of Audiology, 17(9), 640-648. https://doi.org/10.3766/jaaa.17.9.3Reliability over three sessions about a week apart, and a mean that depends on the type of noise.
- Brännström, K. J., Lantz, J., Nielsen, L. H., & Olsen, S. Ø. (2012). Acceptable noise level with Danish, Swedish, and non-semantic speech materials. International Journal of Audiology, 51(3), 146-156. https://doi.org/10.3109/14992027.2011.609183Other languages and speech materials, and the finding that extrinsic factors such as the instructions affect the level.
- Olsen, S. Ø., & Brännström, K. J. (2014). Does the acceptable noise level (ANL) predict hearing-aid use? International Journal of Audiology, 53(1), 2-20. https://doi.org/10.3109/14992027.2013.839887A review of 45 papers: no method measures the level precisely, and its prediction of hearing aid use has yet to be proven valid.
- Laureyns, M., Pugliese, G., Freyaldenhoven Bryan, M., Willekens, M., Gasbarre, A. M., Zanetti, D., Gilson, J., Van Doren, P., & Di Berardino, F. (2024). Multicenter study on the impact of the masker babble spectrum on the acceptable noise level (ANL) test. Audiology Research, 14(6), 1075-1083. https://doi.org/10.3390/audiolres14060088The instructions for the two levels, and the effect of the babble's spectrum.
- Woods, K. J. P., Siegel, M. H., Traer, J., & McDermott, J. H. (2017). Headphone screening to facilitate web-based auditory experiments. Attention, Perception, & Psychophysics, 79(7), 2064-2072. https://doi.org/10.3758/s13414-017-1361-2The headphone check before the test.
Source papers
- Nabelek, Tucker and Letowski (1991): the acceptable noise level. Nabelek, Freyaldenhoven, Tampas, Burchfield and Muenchen (2006), Freyaldenhoven, Smiley, Muenchen and Konrad (2006), Brännström, Lantz, Nielsen and Olsen (2012), Olsen and Brännström (2014) and Laureyns and colleagues (2024): its use, reliability, instructions and limits.Paradigm source, Adults
Questions
How long does the Noise Acceptance Task take?
About 6 to 8 minutes, as listed in the test library.
What device does a participant need?
Untimed test: runs on desktops, laptops, tablets and phones. Needs headphones. The browser must be Chrome, Edge, Firefox or Safari.
What scores does it produce?
Acceptable Noise Level, Acceptable Noise Level, Started Quiet, Acceptable Noise Level, Started Loud, Start Difference, Story Level, Babble Level, Story Slider Moves, Babble Slider Moves, Median Setting Time, Completed Rounds, Planned Rounds, Headphone Check Passed, Headphone Check Correct and Reported Output Delay. Each session is also marked valid, needs review or invalid, with the reason.
How widely is the Noise Acceptance Task used in research?
51 papers from 2021 to 2025 name it in their title or abstract, down 20% compared with 2016 to 2020. That ranks it 453 of 711 test families in the ConductCognition test census (use grade D). Source: ConductCognition test census 0.58.0, counted 16 November 2026 from OpenAlex and ClinicalTrials.gov.
How much reliability evidence does the Noise Acceptance Task have?
In the published research, 7 papers report its test-retest reliability and 2 registered clinical studies use it as an outcome (evidence grade C in the ConductCognition test census).
Does it report a percentile?
No. Scores and quality flags only.
Which settings can a researcher change?
When the headphone check fails (Stop the test, Continue the test). Settings can be changed on yearly plans; free and pay-as-you-go studies use the standard settings.
Which languages can participants use?
Participants can take this test in English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese, with its words in the same language. English is on every plan, and the other languages come with yearly plans. Have a native speaker read the machine-translated text before launch.
Is this a clinical test?
No. ConductCognition is for research use only. It runs, scores and exports the test; clinical interpretation is outside the platform.
Every test: the full test list.
Run this test in your next study
Start free with 10 free participants on any test, then use participant credits or a yearly plan.
Related tests