Attention
Lightness Matching Task
Also called: lightness perception, lightness constancy, lightness illusions, perceived lightness, checker shadow illusion, simultaneous lightness contrast, simultaneous brightness contrast, White's illusion, White's effect
Measure how shadows and surroundings change how light a gray surface looks, with matches set on the same screen and scored against the surface's own gray.
6-8 minUntimed
Free to start: 10 free participants per account, then $0.99 per participant for academic research, or any yearly plan. Try it here first, with no account.
- Papers, 2021 to 2025
- 69
- Evidence grade
- D
- Registered clinical studies
- 0
What it measures
Measures how shadows and surroundings change how light a gray surface looks. Participants set a patch to the same gray as a marked part of a drawn display: a checkerboard with a cast shadow, gray squares on black and white, or gray bars on black and white stripes. Each match is scored against the surface's own gray.
Constructs
- Lightness perception
- Lightness constancy
- Simultaneous lightness contrast
- Perceptual organization
Research uses
- Visual perception research
- Lightness and brightness research
- Individual differences in visual illusions
Scores
- Mean Effectscore
- Geometric mean of the three display effects (shadow, contrast and stripes). Null unless every display has a usable match for both of its targets.
- 1 means the displays changed nothing; above 1 means the lighter-looking targets were matched lighter; neither end is better
- Shadow Effectscore
- Matches of the light check in the shadow over matches of the dark check in light, each a geometric mean of the patch's gray level over the target's. Both checks have the same gray level.
- Above 1 means the check in shadow looked lighter, as a light surface in shadow
- Contrast Effectscore
- Matches of the gray square on black over matches of the same gray square on white.
- Above 1 means the square on black looked lighter
- Stripes Effectscore
- Matches of the gray bar on a black stripe over matches of the same gray bar on a white stripe (White's display).
- Above 1 means the bar on the black stripe looked lighter
- In Shadow vs Plainscore
- Matches of the light check in the shadow over matches of the plain square at the same gray level.
- Above 1 means the shadow made the check look lighter than the plain square
- In Light vs Plainscore
- Matches of the dark check in light over matches of the plain square at the same gray level.
- Below 1 means the board made the check look darker than the plain square
- On Black vs Plainscore
- Matches of the square on black over matches of the plain square at the same gray level.
- Above 1 means black around it made the square look lighter
- On White vs Plainscore
- Matches of the square on white over matches of the plain square at the same gray level.
- Below 1 means white around it made the square look darker
- On Black Stripe vs Plainscore
- Matches of the bar on a black stripe over matches of the plain square at the same gray level.
- Above 1 means the bar looked lighter than the plain square
- On White Stripe vs Plainscore
- Matches of the bar on a white stripe over matches of the plain square at the same gray level.
- Below 1 means the bar looked darker than the plain square
- Plain Matchscore
- Geometric mean of the plain matches, each the patch's gray level over the square's. The plain square sits on the same checks as the patch.
- Near 1 means the plain squares were matched closely; it shows any leaning of the person's matches toward lighter or darker
- Plain Match Error%
- Median distance of the plain matches from their square's gray level, as a percent of it.
- Lower means closer plain matches; over 25 is flagged for review
- Start Pullscore
- Per target, matches that started lighter over matches that started darker, combined as a geometric mean over targets with both.
- Near 1 means the start did not steer the match; over 1.25 is flagged for review
- Median Match Timems
- Median time from the card appearing to Done, on usable matches.
- Informational; there is no time limit
- Unadjusted Matchescount
- Matches confirmed with the patch where it started, which leave the scores.
- Half or more invalidates; any is flagged for review
- Completed Matchestrials
- Matches recorded in the scored run.
- Fewer than planned is flagged for review
- Planned Matchestrials
- Matches the run set out to ask for.
- Informational
Use and evidence
69 papers from 2021 to 2025 name this task in their title or abstract, down 16% compared with 2016 to 2020. That ranks it 375 of 711 test families in our census. See the counts for every test.
Show the numbers
| Year | Papers |
|---|---|
| 2025 | 11 |
| 2024 | 15 |
| 2023 | 12 |
| 2022 | 15 |
| 2021 | 16 |
| 2020 | 12 |
| 2019 | 8 |
| 2018 | 26 |
| 2017 | 21 |
| 2016 | 15 |
| 2015 | 25 |
| 2014 | 33 |
| 2013 | 26 |
| 2012 | 21 |
| 2011 | 32 |
| 2010 | 83 |
| 2009 | 14 |
| 2008 | 13 |
| 2007 | 9 |
| 2006 | 28 |
| 2005 | 15 |
| 2004 | 22 |
| 2003 | 16 |
| 2002 | 16 |
| 2001 | 10 |
| 2000 | 5 |
Use grade D
30 to 99 papers from 2021 to 2025.
Evidence grade D
Little published measurement evidence found.
- Papers on test-retest reliability
- 0
- Papers on reliability or validity
- 16
- Registered clinical studies using it as an outcome
- 0
Measured on ConductCognition
Pooled across the studies that feed our platform norms, by device group. A figure needs 50 or more people.
No pooled figure yet.
Note on the counts: includes color science and display studies.
How the grades work
Use: A is 1,000 or more papers from 2021 to 2025, B 300 to 999, C 100 to 299, D 30 to 99 and E fewer than 30. Evidence: A means at least 25 papers report its test-retest reliability and at least 25 registered clinical studies use it as an outcome; B, at least 8 test-retest papers, and either 5 registered clinical studies or 150 reliability or validity papers; C, at least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies; D, little published measurement evidence found. The counts measure use. They include every paper that names the task in its title or abstract. Grades describe the published research on this task, not ConductCognition's version of it.
Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
Task design
The trial sequence as the test runs in ConductCognition.
- Displays
- A 5 by 5 checkerboard (gray levels 210 and 120) with a ball whose shadow scales every gray level inside it by 4/7; two gray squares (136) on black and on white; and 14 black and white stripes with gray bars (112) on three black and three white stripes. Each display is mirrored left to right on alternate rounds.
- Targets
- Two in each display with the same gray level: the light check in the shadow and a dark check in light (both 120), the square on black and the square on white, and a bar on a black and a bar on a white stripe. A plain square on black and white checks at each display's gray level is its control.
- Matching
- A red dot marks the target for the first 1,000 ms, and a click on the display shows it again. The patch sits on black and white checks beside the display, starts 40 to 80 gray levels darker or lighter than the target and moves one level per arrow key or button press, or anywhere along the bar. Done ends the match, with no time limit.
- Rounds
- 3 rounds of 9 matches (standard; 2 to 5): 27 matches, in an order with no display twice in a row and a break between rounds.
- Practice
- 2 plain squares at gray levels 88 and 168, each followed for 1,500 ms by whether the match was close (within 6%), lighter or darker.
- Scores
- Each match is the patch's gray level over the target's. Per display, the lighter-looking target's geometric mean over the other's, where 1 means no effect; the mean of the three; each target against its plain control; and how close the plain matches came.
The displays are drawn in code, and each score is a ratio of two gray levels on the same screen, so no screen calibration is needed. Neither a larger nor a smaller effect is a better score. The scores support research and do not diagnose.
Quality checks
Each session is marked valid, needs review or invalid, with the reason, before you see its scores.
Scored rows: lightness_matching_test rows from the scored run, one per match. A match has no option to compare with chance, so accuracy is not judged against chance. Matches confirmed within 200 ms on at least half the trials invalidate. The patch starts 40 to 80 gray levels from the target: left where it started on at least half the matches invalidates, and on any is flagged. Plain matches more than 25% off at the median, matches pulled toward their start, a display without a usable match for a target and a run short of its planned matches are flagged.
Why these rules
There is no correct option to compare with chance, so accuracy is not judged against chance. An answer under 200 ms is faster than a simple visual reaction, so it cannot reflect the item. Following response-time effort screening for untimed tests (Wise and Kong 2005), the session is invalid only when at least half the answers are that fast. A patch confirmed where it started was not matched. A plain square sits on the same black and white checks as the patch, so a careful match lands close to its gray; large plain errors mean the task was not followed or the screen hid differences, and are flagged, not invalid. Differences between a display's two targets are what the test measures and never count against a session.
No percentile. Scores and quality flags only.
Running this test
Settings you can change
| Setting | Standard | Allowed |
|---|---|---|
| Rounds of matches | 3 | 2 to 5 |
Yearly plans can change settings within these limits. Free and pay-as-you-go studies use the standard settings.
Need a setting this test does not have?
Devices and languages
- Untimed test: runs on desktops and laptops. Participant devices
- Languages: English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese.
- Available on: Every plan, including the free plan.
- No percentile. Scores and quality flags only. How norms work
- Recruiting online? See the setup guides for Prolific, Sona Systems, CloudResearch Connect and Qualtrics.
Cite and describe
Participants completed the Lightness Matching Task in a web browser (ConductCognition task version 1.0.0, scoring version 1.0.0; White, 1979; Adelson, 1993; Gilchrist and colleagues, 1999; Kobayashi and Shapiro, 2025), with the standard settings (rounds of matches: 3). The main score was mean effect (geometric mean of the three display effects (shadow, contrast and stripes)).
ConductCognition versions: task version 1.0.0, scoring version 1.0.0. Every export records the versions each session used, for a methods section.
- Adelson, E. H. (1993). Perceptual organization and the judgment of brightness. Science, 262(5142), 2042-2044. https://doi.org/10.1126/science.8266102Identical gray patches look different when the arrangement around them changes how it is organized; the checkerboard with a cast shadow builds on this.
- White, M. (1979). A new effect of pattern on perceived lightness. Perception, 8(4), 413-416. https://doi.org/10.1068/p080413Gray bars on the black stripes of a grating look lighter than the same gray on the white stripes.
- Gilchrist, A., Kossyfidis, C., Bonato, F., Agostini, T., Cataliotti, J., Li, X., Spehar, B., Annan, V., & Economou, E. (1999). An anchoring theory of lightness perception. Psychological Review, 106(4), 795-834. https://doi.org/10.1037/0033-295X.106.4.795One account of the errors in surface lightness that come with lighting and with backgrounds.
- Kingdom, F. A. A. (2011). Lightness, brightness and transparency: A quarter century of new ideas, captivating demonstrations and unrelenting controversy. Vision Research, 51(7), 652-673. https://doi.org/10.1016/j.visres.2010.09.012Review of lightness, the perceived reflectance of a surface, and of how context changes it.
- Kobayashi, Y., & Shapiro, A. G. (2025). Relationships among lightness illusions uncovered by analyses of individual differences. Journal of Vision, 25(12), 14. https://doi.org/10.1167/jov.25.12.14Online matches by adjusting a patch on black and white checks, with each illusion's size taken from the difference between its two targets.
Source papers
- Kobayashi Y, Shapiro AG (2025). Relationships among lightness illusions uncovered by analyses of individual differences. Journal of Vision, 25(12):14.N 219, Adults
Questions
How long does the Lightness Matching Task take?
About 6 to 8 minutes, as listed in the test library.
What device does a participant need?
Untimed test: runs on desktops and laptops. The browser must be Chrome, Edge, Firefox or Safari.
What scores does it produce?
Mean Effect, Shadow Effect, Contrast Effect, Stripes Effect, In Shadow vs Plain, In Light vs Plain, On Black vs Plain, On White vs Plain, On Black Stripe vs Plain, On White Stripe vs Plain, Plain Match, Plain Match Error, Start Pull, Median Match Time, Unadjusted Matches, Completed Matches and Planned Matches. Each session is also marked valid, needs review or invalid, with the reason.
How widely is the Lightness Matching Task used in research?
69 papers from 2021 to 2025 name it in their title or abstract, down 16% compared with 2016 to 2020. That ranks it 375 of 711 test families in the ConductCognition test census (use grade D). Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
How much reliability evidence does the Lightness Matching Task have?
In the published research, 0 papers report its test-retest reliability and 0 registered clinical studies use it as an outcome (evidence grade D in the ConductCognition test census).
Does it report a percentile?
No. Scores and quality flags only.
Which settings can a researcher change?
Rounds of matches (2 to 5). Settings can be changed on yearly plans; free and pay-as-you-go studies use the standard settings.
Which languages can participants use?
Participants can take this test in English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese. English is on every plan, and the other languages come with yearly plans. Have a native speaker read the machine-translated text before launch.
Is this a clinical test?
No. ConductCognition is for research use only. It runs, scores and exports the test; clinical interpretation is outside the platform.
Every test: the full test list.
Run this test in your next study
Start free with 10 free participants on any test, then use participant credits or a yearly plan.