Processing Speed
Interception Task
Also called: manual interception, interceptive timing, interceptive actions, hitting moving targets, catching task
Measure how well participants catch moving targets on straight and curved paths, some hidden before the catch, by mouse or touch.
4-6 minTimed: desktop or laptop with a mouse or trackpad
Free to start: 10 free participants per account, then $0.99 per participant for academic research, or any yearly plan. Try it here first, with no account.
- Papers, 2021 to 2025
- 128
- Evidence grade
- D
- Registered clinical studies
- 2
What it measures
Measures how well people catch moving targets. A ball comes down the screen on a straight or curved path, sometimes passing under a cover, and participants click or tap it as it crosses a band. Scores report hits, timing error and spatial error by path and visibility.
Constructs
- Interceptive timing
- Motion prediction
- Visuomotor control
- Eye-hand coordination
Research uses
- Motor control research
- Sport and skill research
- Aging research
How the paradigm works
The Interception Task measures how well people catch moving targets. A ball comes down the screen at a steady speed, on a straight path or a curve, and the participant clicks or taps it as it crosses a band near the bottom. The catch is judged where the ball was at the moment of the press, as in studies where people tap moving targets on a screen (Brenner and Smeets, 2015). On half the trials a cover hides the lower part of the screen, band included, so the ball goes out of sight before the band and its path must be predicted (Brenner and Smeets, 2011; Reid and Dessing, 2018).
More about the paradigm
Each ball starts when the participant presses a dot at the bottom of the field, and appears at the top 500 to 900 ms later. The field is 480 by 560 field units, scaled to the screen. Balls move at 280 or 400 field units a second; straight paths lean 4 to 22 degrees from the vertical, and curves turn 55 degrees to the left or right before the band. Four conditions (straight or curved, seen or hidden) have 10 balls each (standard; 6 to 20), half slow and half fast, in an order drawn from the session's seed, after 6 practice balls. After every press the ball is shown where it was, with the outcome. About 4 to 6 minutes.
Scores
- Hit Rate%
- Share of balls caught: a press inside the band that lands inside the ball's outline at that moment. Balls let through count as misses; balls whose display stalled leave the score.
- Higher means more catches
- Hit Rate by Condition%
- Share of balls caught on straight and curved paths, seen all the way or hidden before the band (keys straight_visible, straight_hidden, curved_visible, curved_hidden), each with at least three balls.
- Compare conditions within a person
- Absolute Timing Errorms
- Mean absolute difference between the press and the moment the ball passed nearest the press point, over usable presses.
- Lower means closer timing
- Signed Timing Errorms
- Mean press time minus the time the ball passed nearest the press point.
- Negative is early; positive is late
- Timing Variabilityms
- Sample standard deviation of the signed timing errors.
- Lower means more consistent timing
- Spatial Errorscore
- Mean distance from the press to the ball's path, in ball radii, over usable presses.
- Lower means presses closer to the path
- Timing Error by Conditionms
- Mean absolute timing error in each condition with at least three usable presses.
- Compare conditions within a person
- Spatial Error by Conditionscore
- Mean spatial error, in ball radii, in each condition with at least three usable presses.
- Compare conditions within a person
- Hidden Path Cost%
- Hit rate on balls seen all the way minus hit rate on balls hidden before the band.
- Higher means hiding cost more catches
- Curved Path Cost%
- Hit rate on straight paths minus hit rate on curved paths.
- Higher means curves cost more catches
- Curve Biasscore
- Mean signed distance of presses from hidden curved paths, in ball radii: positive to the outside of the curve, where a straight continuation would run.
- Positive means the curve was not fully predicted
- Balls Let Throughcount
- Balls that left the band with no press inside it.
- Lower means fewer missed chances
- Anticipationscount
- Presses within 100 ms of the ball appearing.
- Should be near zero
- Presses Outside the Bandcount
- Presses above or below the band while a ball moved; they do not end the ball.
- Informational
- Display Gapscount
- Balls with a gap over 100 ms between frames; they leave the scores.
- Above zero is flagged for review
- Usable Pressestrials
- Presses inside the band, at or after 100 ms, within 300 ms and 4 ball radii of the ball's path, that enter the error estimates.
- Informational
- Completed Ballstrials
- Test balls in the scored run.
- Fewer than planned is flagged for review
- Planned Ballstrials
- Test balls the run set out to show.
- Informational
- Frame Intervalms
- Median time between screen frames during the motion.
- Informational; about 16.7 ms on a 60 Hz display
Use and evidence
128 papers from 2021 to 2025 name this task in their title or abstract, up 4% compared with 2016 to 2020. That ranks it 238 of 711 test families in our census. See the counts for every test.
Show the numbers
| Year | Papers |
|---|---|
| 2025 | 40 |
| 2024 | 27 |
| 2023 | 22 |
| 2022 | 16 |
| 2021 | 23 |
| 2020 | 15 |
| 2019 | 35 |
| 2018 | 21 |
| 2017 | 31 |
| 2016 | 21 |
| 2015 | 18 |
| 2014 | 24 |
| 2013 | 20 |
| 2012 | 19 |
| 2011 | 21 |
| 2010 | 31 |
| 2009 | 16 |
| 2008 | 15 |
| 2007 | 18 |
| 2006 | 13 |
| 2005 | 14 |
| 2004 | 37 |
| 2003 | 13 |
| 2002 | 13 |
| 2001 | 7 |
| 2000 | 7 |
Use grade C
100 to 299 papers from 2021 to 2025.
Evidence grade D
Little published measurement evidence found.
- Papers on test-retest reliability
- 0
- Papers on reliability or validity
- 20
- Registered clinical studies using it as an outcome
- 2
Measured on ConductCognition
Pooled across the studies that feed our platform norms, by device group. A figure needs 50 or more people.
No pooled figure yet.
How the grades work
Use: A is 1,000 or more papers from 2021 to 2025, B 300 to 999, C 100 to 299, D 30 to 99 and E fewer than 30. Evidence: A means at least 25 papers report its test-retest reliability and at least 25 registered clinical studies use it as an outcome; B, at least 8 test-retest papers, and either 5 registered clinical studies or 150 reliability or validity papers; C, at least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies; D, little published measurement evidence found. The counts measure use. They include every paper that names the task in its title or abstract. Grades describe the published research on this task, not ConductCognition's version of it.
Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
Task design
The trial sequence as the test runs in ConductCognition.
- Field
- 480 by 560 field units, scaled to the screen: a dark field with a band near the bottom (y 400 to 480) and a start dot below it. On hidden trials a cover hides everything below y = 300, band included.
- Balls
- A ball of radius 16 enters at the top 500 to 900 ms after a press on the start dot and moves down at 280 or 400 field units per second: on a straight path leaning 4 to 22 degrees from the vertical, or on an arc that turns 55 degrees to the left or right before the band.
- Response
- One click or tap inside the band; the ball is caught when the press lands inside its outline at that moment. Presses outside the band do not end the ball. After each ball, its position at the press and the outcome show for 900 ms.
- Balls per condition
- 10 (standard; 6 to 20) of each of four conditions, straight or curved and seen or hidden, half slow and half fast, in an order drawn from the session's seed, after 6 practice balls, with a rest halfway.
- Errors
- Timing error is the press time minus the time the ball passed nearest the press point; spatial error is that nearest distance, in ball radii. Presses within 300 ms and 4 ball radii of the path enter the error estimates.
- Input
- Mouse, trackpad, pen or a finger on a touch screen; every press is saved with its position, time and pointer type.
Every ball's path is fixed from the session's seed before the first ball, and its position follows the time since it appeared, so a slow frame never moves it. A ball whose display stalls for more than 100 ms leaves the scores. The scores support research and do not diagnose.
Quality checks
Each session is marked valid, needs review or invalid, with the reason, before you see its scores.
Scored rows: interception_test from the run with most trials. A press inside the band catches the ball when it lands inside the ball's outline; there is no chance level and no repeated-response check. A ball let through is a missed response. Missed responses and responses under 100 ms follow the timed-test rule. Gaps over 100 ms between frames and incomplete runs are flagged. Error estimates need three usable presses.
Why these rules
A catch is judged where the ball was at the press, so it has no chance level. The 100 ms threshold starts when the ball appears, before there is enough motion to judge its path. A frame gap over 100 ms makes the ball jump, so that ball leaves the scores. A hidden tab changes the motion and withholds a percentile.
No percentile. Scores and quality flags only.
Running this test
Settings you can change
| Setting | Standard | Allowed |
|---|---|---|
| Balls per condition | 10 | 6 to 20 |
Yearly plans can change settings within these limits. Free and pay-as-you-go studies use the standard settings.
Need a setting this test does not have?
Devices and languages
- Timed test: participants need a desktop or laptop with a mouse or trackpad. Participant devices
- Languages: English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese.
- Available on: Every plan, including the free plan.
- No percentile. Scores and quality flags only. How norms work
- Recruiting online? See the setup guides for Prolific, Sona Systems, CloudResearch Connect and Qualtrics.
Cite and describe
Participants completed the Interception Task in a web browser (ConductCognition task version 1.0.0, scoring version 1.0.0; Brenner and Smeets, 2011, 2015; Reid and Dessing, 2018; Lee et al., 1983), with the standard settings (balls per condition: 10). The main score was hit rate (share of balls caught: a press inside the band that lands inside the ball's outline at that moment).
ConductCognition versions: task version 1.0.0, scoring version 1.0.0. Every export records the versions each session used, for a methods section.
- Brenner, E., & Smeets, J. B. J. (2015). How people achieve their amazing temporal precision in interception. Journal of Vision, 15(3), 8. https://doi.org/10.1167/15.3.8Tapping targets that move across a screen; the hit is judged from the fingertip against the target at the tap, and timing error is the error along the path divided by the speed.
- Brenner, E., & Smeets, J. B. J. (2011). Continuous visual control of interception. Human Movement Science, 30(3), 475-494. https://doi.org/10.1016/j.humov.2010.12.007Hiding the target for its last stretch before the hit lowers precision.
- Brenner, E., & Smeets, J. B. J. (2007). Flexibility in intercepting moving objects. Journal of Vision, 7(5), 14. https://doi.org/10.1167/7.5.14A target counts as hit when the pen meets its outline.
- Reid, S. A., & Dessing, J. C. (2018). Spatial biases in motion extrapolation for manual interception. Journal of Experimental Psychology: Human Perception and Performance, 44(1), 38-52. https://doi.org/10.1037/xhp0000407On a touch screen, hiding the target gave spatial errors on curved and diagonal paths.
- Lee, D. N., Young, D. S., Reddish, P. E., Lough, S., & Clayton, T. M. H. (1983). Visual timing in hitting an accelerating ball. The Quarterly Journal of Experimental Psychology Section A, 35(2), 333-346. https://doi.org/10.1080/14640748308402138People time an interceptive action from the visual information that specifies the time to contact.
- Bootsma, R. J., & van Wieringen, P. C. W. (1990). Timing an attacking forehand drive in table tennis. Journal of Experimental Psychology: Human Perception and Performance, 16(1), 21-29. https://doi.org/10.1037/0096-1523.16.1.21Timing is more precise at contact than at the start of the movement.
- Zago, M., McIntyre, J., Senot, P., & Lacquaniti, F. (2009). Visuo-motor coordination and internal models for object interception. Experimental Brain Research, 192(4), 571-604. https://doi.org/10.1007/s00221-008-1691-3Review: interception draws on visual information and on internal models of the object's motion.
Source papers
- Brenner E, Smeets JBJ (2015). How people achieve their amazing temporal precision in interception. Journal of Vision, 15(3):8.N 8, Adults
Questions
How long does the Interception Task take?
About 4 to 6 minutes, as listed in the test library.
What device does a participant need?
Timed test: participants need a desktop or laptop with a mouse or trackpad. The browser must be Chrome, Edge, Firefox or Safari.
What scores does it produce?
Hit Rate, Hit Rate by Condition, Absolute Timing Error, Signed Timing Error, Timing Variability, Spatial Error, Timing Error by Condition, Spatial Error by Condition, Hidden Path Cost, Curved Path Cost, Curve Bias, Balls Let Through, Anticipations, Presses Outside the Band, Display Gaps, Usable Presses, Completed Balls, Planned Balls and Frame Interval. Each session is also marked valid, needs review or invalid, with the reason.
How widely is the Interception Task used in research?
128 papers from 2021 to 2025 name it in their title or abstract, up 4% compared with 2016 to 2020. That ranks it 238 of 711 test families in the ConductCognition test census (use grade C). Source: ConductCognition test census 0.58.0, counted 14 November 2026 from OpenAlex and ClinicalTrials.gov.
How much reliability evidence does the Interception Task have?
In the published research, 0 papers report its test-retest reliability and 2 registered clinical studies use it as an outcome (evidence grade D in the ConductCognition test census).
Does it report a percentile?
No. Scores and quality flags only.
Which settings can a researcher change?
Balls per condition (6 to 20). Settings can be changed on yearly plans; free and pay-as-you-go studies use the standard settings.
Which languages can participants use?
Participants can take this test in English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese. English is on every plan, and the other languages come with yearly plans. Have a native speaker read the machine-translated text before launch.
Is this a clinical test?
No. ConductCognition is for research use only. It runs, scores and exports the test; clinical interpretation is outside the platform.
Every test: the full test list.
Run this test in your next study
Start free with 10 free participants on any test, then use participant credits or a yearly plan.