Attention
Fading Spot Task
Also called: perceptual filling-in, Troxler fading, Troxler effect, artificial scotoma, peripheral fading, time to fade, fading target, filling-in of a gray patch
Measure how long a spot to one side of a fixation dot stays in view before it fades, by its distance from the dot and the blur of its edge.
8-10 minTimed: desktop or laptop with a mouse or trackpad
Free to start: 10 free participants per account, then $0.99 per participant for academic research, or any yearly plan. Try it here first, with no account.
- Papers, 2021 to 2025
- 70
- Evidence grade
- D
- Registered clinical studies
- 0
What it measures
A measure of how quickly a spot fades from view while the eyes stay on one point. A white dot sits in the middle of a still textured field, and a gray patch or a blurred spot shows to one side of it. Participants hold the space bar while the spot stays in view and let go when it has faded. The score is the time to fade, by the spot's distance from the dot and the blur of its edge, in screen units. The field never changes, and in a few displays the spot really fades out so the releases can be checked. A longer or shorter time is not a better score.
Constructs
- Perceptual filling-in
- Troxler fading
- Peripheral vision
- Visual adaptation
Research uses
- Visual perception research
- Peripheral vision research
- Individual differences in visual adaptation
Scores
- Median Fade Timeseconds
- Median time from the spot's first screen frame to the release of the space bar, over the displays with a spot to fade. A display that ran to its limit with the key still down counts at the limit.
- Informational; a longer or shorter time is neither better nor worse
- Mean Fade Timeseconds
- Mean of the same times.
- Informational; more affected by displays that ran to the limit
- Faded Share%
- Share of the displays in which the space bar was let go before the limit.
- Informational; low means the spots were mostly seen to the end
- Fade Time at 120 Unitsseconds
- Median fade time with the spot 120 screen units from the white dot.
- Informational
- Fade Time at 180 Unitsseconds
- Median fade time with the spot 180 screen units from the white dot.
- Informational
- Fade Time at 240 Unitsseconds
- Median fade time with the spot 240 screen units from the white dot.
- Informational
- Fade Time, Sharp Edgeseconds
- Median fade time with a sharp-edged patch.
- Informational
- Fade Time, Soft Edgeseconds
- Median fade time with an edge blurred by 7 screen units.
- Informational
- Fade Time, Blurred Edgeseconds
- Median fade time with an edge blurred by 14 screen units.
- Informational
- Effect of Distanceseconds
- The median fade time at 240 screen units less the median at 120.
- Negative means spots farther from the dot faded sooner
- Effect of Blurseconds
- The median fade time with the blurred edge less the median with the sharp edge.
- Negative means blurred spots faded sooner
- Real Fades Let Go%
- Of the displays in which the spot really faded out, the share in which the key went up from the start of the fade until 1,500 ms after the spot was gone. Displays in which the key went up before the fade cannot be checked and are left out.
- Under 0.6 is flagged; under 0.4 is invalid, with at least 2 that can be checked
- Real Fades Checkedcount
- Real fades in which the key was still down when the fade began.
- Fewer than 2 is flagged, since the releases could not be checked
- Time to Let Go of a Real Fadems
- Median time from the start of a real fade to the release, over the real fades let go.
- Informational; the fade takes 1,500 ms
- Quick Releasescount
- Displays released within 1 s of the spot's first frame, sooner than a spot fades.
- More than a quarter of the displays is flagged
- Anticipationscount
- Displays released within 100 ms of the spot's first frame, which leave the scores.
- Any is flagged
- False Startscount
- Taps of the space bar that ended before the spot showed.
- Informational
- Interrupted Displayscount
- Displays that ended because the window lost focus while the key was down, which leave the scores.
- Any is flagged
- Frame Intervalms
- Median time between screen frames during the displays.
- About 16.7 on a 60 Hz screen
- Dropped Frame Rate%
- Share of screen frames the browser skipped during the displays.
- Over 0.05 is flagged
- Completed Displaystrials
- Displays that ended at a release or at the limit with the window still open.
- Fewer than planned is flagged for review
- Planned Displaystrials
- Displays the run set out to show, with the real fades.
- Informational
Use and evidence
70 papers from 2021 to 2025 name this task in their title or abstract, up 11% compared with 2016 to 2020. That ranks it 370 of 711 test families in our census. See the counts for every test.
Show the numbers
| Year | Papers |
|---|---|
| 2025 | 26 |
| 2024 | 12 |
| 2023 | 6 |
| 2022 | 12 |
| 2021 | 14 |
| 2020 | 18 |
| 2019 | 17 |
| 2018 | 11 |
| 2017 | 7 |
| 2016 | 10 |
| 2015 | 16 |
| 2014 | 16 |
| 2013 | 17 |
| 2012 | 16 |
| 2011 | 15 |
| 2010 | 47 |
| 2009 | 17 |
| 2008 | 14 |
| 2007 | 16 |
| 2006 | 26 |
| 2005 | 23 |
| 2004 | 21 |
| 2003 | 15 |
| 2002 | 13 |
| 2001 | 15 |
| 2000 | 7 |
Use grade D
30 to 99 papers from 2021 to 2025.
Evidence grade D
Little published measurement evidence found.
- Papers on test-retest reliability
- 0
- Papers on reliability or validity
- 13
- Registered clinical studies using it as an outcome
- 0
Measured on ConductCognition
Pooled across the studies that feed our platform norms, by device group. A figure needs 50 or more people.
No pooled figure yet.
How the grades work
Use: A is 1,000 or more papers from 2021 to 2025, B 300 to 999, C 100 to 299, D 30 to 99 and E fewer than 30. Evidence: A means at least 25 papers report its test-retest reliability and at least 25 registered clinical studies use it as an outcome; B, at least 8 test-retest papers, and either 5 registered clinical studies or 150 reliability or validity papers; C, at least 2 test-retest papers, 30 reliability or validity papers or 3 registered clinical studies; D, little published measurement evidence found. The counts measure use. They include every paper that names the task in its title or abstract. Grades describe the published research on this task, not ConductCognition's version of it.
Source: ConductCognition test census 0.58.0, counted 16 November 2026 from OpenAlex and ClinicalTrials.gov.
Task design
The trial sequence as the test runs in ConductCognition.
- Display
- A 640 by 420 field of 8 px cells in six grays, drawn once from each display's seed and never changed, with a white dot at the center to look at. The target is a gray patch a little lighter than the field's mean gray, 48 screen units across, to the left or right of the dot.
- Conditions
- Three distances from the dot, 120, 180 and 240 screen units, and three edges, sharp or blurred by 7 or 14 screen units: nine pairs, each on each side as evenly as the count allows.
- Displays
- 2 repeats (standard; 1 to 3) of the nine pairs, each time through in a new order, and 3 displays in which the spot really fades out: 21 displays. A rest of 6 s comes between displays.
- Answer
- The space bar, held while the spot is in view and let go when it has faded. A display ends at the release or after 30 s (standard; 20 to 45) with the key still down.
- Checks
- In the practice and in 3 test displays, one in each third of the session, the spot really fades out over 1,500 ms at a distance of 120 units with a sharp edge. The share of these let go from the start of the fade until 1,500 ms after the spot is gone checks the releases.
- Practice
- One display with a real fade, followed by the time of the fade and the time of the release.
- Scores
- The median time to fade, at each distance and each blur, the effect of distance and of blur in seconds, the share of displays that faded before the limit, and the share of real fades let go.
The field and the spot are drawn in code, distances and blurs are screen units, and the scores are times on the participant's own screen, so no calibration is needed. A longer or shorter time to fade is not a better score. The scores support research and do not diagnose.
Quality checks
Each session is marked valid, needs review or invalid, with the reason, before you see its scores.
Scored rows: fading_spot_test from the scored run, one per display, the key held while the spot was in view. A fade is what the participant saw, so it is never right or wrong: accuracy is not judged against chance, and a display that ran to its limit with the key still down is a valid report of a spot that did not fade. The check is the displays in which the spot really fades out: with at least 2 that can be checked, letting go for under 40% of them invalidates and under 60% is flagged. Fewer than 2 that can be checked, a run short of its planned displays, more than a quarter of the displays released within a second, and more than 5% of frames dropped are flagged for review; releases within 100 ms and displays that ended when the window lost focus leave the scores.
Why these rules
There is no correct option to compare with chance, so accuracy is not judged against chance. Perceptual filling-in is the report of a target that is still on screen, so how soon it is reported is the measure, and it varies a great deal between people (Bonneh, Donner, Cooperman, Heeger and Sagi, 2014), so a long time or none is a result, not an error. When the spot really fades out, a participant who follows the task lets go as for any fade, so keeping hold through most of them means the key did not follow the display. A fade takes seconds to build, so a release within a second of the spot's first frame is flagged, and one within 100 ms cannot report it. A hidden tab ends the display, and a percentile is withheld after one.
No percentile. Scores and quality flags only.
Running this test
Settings you can change
| Setting | Standard | Allowed |
|---|---|---|
| Displays of each distance and blur | 2 | 1 to 3 |
| Longest display (seconds) | 30 | 20 to 45 |
Yearly plans can change settings within these limits. Free and pay-as-you-go studies use the standard settings.
Need a setting this test does not have?
Devices and languages
- Timed test: participants need a desktop or laptop with a mouse or trackpad. Participant devices
- Languages: English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese.
- Available on: Every plan, including the free plan.
- No percentile. Scores and quality flags only. How norms work
- Recruiting online? See the setup guides for Prolific, Sona Systems, CloudResearch Connect and Qualtrics.
Cite and describe
Participants completed the Fading Spot Task in a web browser (ConductCognition task version 1.0.0, scoring version 1.0.0; Ramachandran and Gregory, 1991; De Weerd, Desimone and Ungerleider, 1998; Bonneh, Donner, Cooperman, Heeger and Sagi, 2014), with the standard settings (displays of each distance and blur: 2; longest display (seconds): 30). The main score was median fade time (median time from the spot's first screen frame to the release of the space bar, over the displays with a spot to fade).
ConductCognition versions: task version 1.0.0, scoring version 1.0.0. Every export records the versions each session used, for a methods section.
- Bonneh, Y. S., Donner, T. H., Cooperman, A., Heeger, D. J., & Sagi, D. (2014). Motion-induced blindness and Troxler fading: common and different mechanisms. PLoS ONE, 9(3), e92894. https://doi.org/10.1371/journal.pone.0092894Time to fade as the measure of Troxler fading, from a button held and released, with at least 5 s between trials.
- Ramachandran, V. S., & Gregory, R. L. (1991). Perceptual filling in of artificially induced scotomas in human vision. Nature, 350(6320), 699-702. https://doi.org/10.1038/350699a0A gray square on twinkling noise of the same mean luminance, which vanishes and is filled in during steady fixation.
- De Weerd, P., Desimone, R., & Ungerleider, L. G. (1998). Perceptual filling-in: a parametric study. Vision Research, 38(18), 2721-2734. https://doi.org/10.1016/S0042-6989(97)00432-XTime to filling-in of a uniform figure on a textured background, which changes with its size, shape and distance from fixation.
- Spillmann, L., & Kurtenbach, A. (1992). Dynamic noise backgrounds facilitate target fading. Vision Research, 32(10), 1941-1946. https://doi.org/10.1016/0042-6989(92)90053-LA target fades more slowly on still noise than on twinkling noise, so the limit here is long.
Source papers
- Bonneh YS, Donner TH, Cooperman A, Heeger DJ, Sagi D (2014). Motion-induced blindness and Troxler fading: common and different mechanisms. PLoS ONE, 9(3):e92894.N 10, Not stated in the methods read
Questions
How long does the Fading Spot Task take?
About 8 to 10 minutes, as listed in the test library.
What device does a participant need?
Timed test: participants need a desktop or laptop with a mouse or trackpad. The browser must be Chrome, Edge, Firefox or Safari.
What scores does it produce?
Median Fade Time, Mean Fade Time, Faded Share, Fade Time at 120 Units, Fade Time at 180 Units, Fade Time at 240 Units, Fade Time, Sharp Edge, Fade Time, Soft Edge, Fade Time, Blurred Edge, Effect of Distance, Effect of Blur, Real Fades Let Go, Real Fades Checked, Time to Let Go of a Real Fade, Quick Releases, Anticipations, False Starts, Interrupted Displays, Frame Interval, Dropped Frame Rate, Completed Displays and Planned Displays. Each session is also marked valid, needs review or invalid, with the reason.
How widely is the Fading Spot Task used in research?
70 papers from 2021 to 2025 name it in their title or abstract, up 11% compared with 2016 to 2020. That ranks it 370 of 711 test families in the ConductCognition test census (use grade D). Source: ConductCognition test census 0.58.0, counted 16 November 2026 from OpenAlex and ClinicalTrials.gov.
How much reliability evidence does the Fading Spot Task have?
In the published research, 0 papers report its test-retest reliability and 0 registered clinical studies use it as an outcome (evidence grade D in the ConductCognition test census).
Does it report a percentile?
No. Scores and quality flags only.
Which settings can a researcher change?
Displays of each distance and blur (1 to 3) and longest display (seconds) (20 to 45). Settings can be changed on yearly plans; free and pay-as-you-go studies use the standard settings.
Which languages can participants use?
Participants can take this test in English, Spanish, French, German, Italian, Portuguese (Brazil), Chinese (Simplified) and Japanese. English is on every plan, and the other languages come with yearly plans. Have a native speaker read the machine-translated text before launch.
Is this a clinical test?
No. ConductCognition is for research use only. It runs, scores and exports the test; clinical interpretation is outside the platform.
Every test: the full test list.
Run this test in your next study
Start free with 10 free participants on any test, then use participant credits or a yearly plan.